NOTE: The Images and the videos you see on this website are not owned or created by us, we get our posts from facebook or youtube and we post according to how we saw it. Some images might not be same with the video content, they are used for reference purposes, so watch the video first.
Unit 2
Poultry Housing
Introduction
Poultry housing is a very important part of your poultry farm as it protects the birds
from predators and rough weather conditions. A comfortable poultry house is also
important for efficient production and convenience of the poultry farmer. In the last
unit you learnt about the advantages, disadvantages and economic value of poultry
keeping. In this unit you will learn the requirements of a good poultry house, how to
identify a suitable location for a poultry house, and the different types of poultry
house systems that you can adopt. As usual, we shall start by reviewing our
objectives for this unit.
Unit Objectives
By the end of this unit you should be able to:
Describe the requirements of a good poultry house;
Identify a suitable size for a poultry house and a good site for construction
Determine the most suitable poultry production system for your project.
Section 2.1: Requirements of a Good Poultry
House
The following are the requirements for a good poultry house:
a) Protection: ensure that the poultry is protected from extreme weather
conditions, such as, high winds and droughts. Also protection from
predators, e.g. hawks, owls, mongoose, wild cats etc.
b) Good Ventilation: the house should have good ventilation, that is, able to
supply oxygen and remove carbon dioxide and dampness. A damp
atmosphere favours the development of pathogen and retards the activity of
the birds. High temperatures may cause deaths or drop in egg production,
low shell quality, and reduced weight gain. A combination of high
temperatures and high humidity may kill young chicks. To protect birds from
the cold, you can use old feed bags as curtains to cover the chicken wire at
night.
c) Ease of cleaning: it should be easy to clean and facilitate parasite and
disease control. All the interior fittings should be removable or easy to clean.
d) Sunlight: this is in order to maintain the heat of the flock (VHD). The sun also
has disinfecting value and is important to the birds.
e) Economical construction: it should use cheap, durable and locally available
materials.
Poultry Keeping & Management
Page 14
f) Accessibility: the house should be convenient in relation to other buildings in the surrounding area. It should be tall enough for a grown-up person to work in there.
g) Spacious: always ensure that your poultry have enough space to run around. This will help you to avoid frequent loss of your birds due to suffocation and contamination.
h) Safe: ensure that your poultry house does not have sharp edges that can injure the birds;
i) Floor: the floor should be cemented or made of concrete for ease of cleaning;
j) Disinfection: a disinfectant dip should be placed at the door of each house to prevent entry of diseases agents into the flock house;
k) Storage: a separate room should be constructed to keep feeds and other equipment in a safe place protected from weather and contamination by humans and rodents.
Perches
Perches are timber frames on which birds perch for rest. They are important for chickens to rest on during the night. It is the natural behaviour of chicken, such as layers and indigenous table birds to sleep above the ground in trees. A one meter perch can roost five adult birds. The perches should be removable to facilitate cleaning. Perches are best made of bamboo or round sticks to accommodate for the size and structure of the birds’ feet. If the sticks are too big or too small, the birds may fall. Perches can also be square and flat: 5-10 cm broad. Figure 1.1 below shows
